Slide

Inteligencja
w garażu

Smart
garage

Enelion devices are ready to
analyze in real time how your home works
in order to optimally fulfill its task.

Products: Wallbox

Smart garage

The charger knows how much power is available

The solution is dedicated to the EV owners who have limited power in their home and do not plan to increase the connection capacity from the power plant. Thanks to Enelion’s Grid meter system, the charger analyses how you use energy in your home. When the fridge, oven or electric heater is turned on, the charger will adjust the charging power to the available power. In short, it will protect the mains electricity supply against overload and emergency power outage.

The house lives its own life

The established rhythm developed over the years ensures harmony. When a new householder appears in the form of an electric car, this melody can be threatened. With Enelion’s unique smartDLB technology, there will always be room for new guests in your home. The charger itself will make sure that the car will not disturb with its charging the peace of mind of the household members. Even when you think there is no room left!

You won’t run out of power

Wallbox Duo Power is two charging sockets with 22kW each, closed in one housing. Uncompromising functionality and full power always available for both vehicles.

Two colors of anodized aluminum

The housing is made of anodized aluminum and is available in two colors: silver and graphite-black. The front of the device is made of hardened plastic to increase protection against scratches.

Two sockets in a charger

Users’ needs direct our development. That’s why we created devices with two charging sockets.

Provide an additional charging point at a lower cost.

Aluminium casing/h1>
Materials such as anodised aluminium allow us to be sure that our devices look good even after many years of service in challenging atmospheric conditions.

Socket with a lock

For maximum compatibility with existing electric vehicle the device is eqiupped with a Type 2 socket. That allows the user to utilize their own charging cable.
Advanced lock management allows for either maximum security or maximum comfort.

Enelion Bridge – bridge to new possibilities!

User expectations are constantly rising. To meet them we have created Enelion Bridge! It’s a module that provides Smart capabilities to a charger and all benefits of Online via OCPP1.6.

See what you can get with Enelion Bridge!

See what happens when you connect your charger to the Internet and a administration system such as Enelink.

Power set to your needs

Enelion chargers were created to satisfy the needs of our clients. That’s why we never limit their capabilities. Each charging terminal may be configured to work in a one-phase or three-phase network. The charging current ranges from 6 to 32 amperes. Your dealer will help you with configuration of these settings.

Power from 1.4 to 22 kW. Just as you need it!

Advanced LED signalling

The Enelion team worked hard on making the status LEDs of the charger intuitive and aesthetically pleasing. Using the unlimited pallette of colours and advanced animation allows you to recognize whether the charger is available, charging or reserved.
Our device always reacts to your actions, so You’ll never get confused.

OLED display

The charger is equipped with a graphic display made with the OLED technology. It allows the user to get all the information necessary for quick charging process. It’s especially useful in publicly accessible devices.

Check the charging status, control the energy usage, be on top of the situation.

Introduce yourself with RFID

Integrated RFID reader allows for user recognition. Well established Mifare card technology provides the capability of user access management.

Use the Offline Card Groups and provide your users with an access to many chargers without connecting them to the Internet.

To use the charger in your own home disable the RFID to begin charging immediately after plugging in (Plug&Charge mode).

Touch to change

Touch buttons complete the Enelion charger interface. Use them to change charger settings, browse statuses or switch the language.

Built in energy measurement

Enelion uses a custom system of energy measurement. This allows for the usage of advancent power management algorithms.

Learn about Enelion DLB* and its benefits.

If you need a certified measurement for energy bill settlement ask about Enelion MID.

RCM B Protection

Local regulations stipulate that one must use protection against direct current leaks. To avoid a costly purchase of a differential current protection switch of type B (1000 PLN and more) choose the optional Enelion Rcm B module.

Chain to achieve more

Enelion charging terminals are useful in all circumstances and applications thanks to their wide range of connection capabilities.
Enelion created Enelion Chain allowing the chargers to:

Learn about Enelion DLB and its benefits.

Wallbox Duo Power

Technical Specification

  • Color
  • Charging power
  • Vehicle connection
  • OLED display / RFID / 2 buttons
  • Energy meter
  • Certified energy meter MID
  • RCM A
  • RCM B
  • IK protection class
  • IP protection class
  • Operating temperature
  • Networking of devices
  • Dynamic distribution of available power (DLB)
  • Smart functions
  • OCPP protocol
  • Remote management
  • Adjustments
  • Dimensions
  • User Manual
  • Installation Manual
  • Quick guide
  • CE certificate

Wallbox Duo Power

  • Silver or Black
  • 2 x 1.4kW – 22kW
  • Two Type 2 sockets with interlock
  • As standard
  • Built-in
  • With additional fee – integrated in the device
  • Built-in
  • With additional fee – integrated in the device
  • IK 10
  • IP 54
  • -25°C / 55°C
  • Built-in – Enelion Chain
  • As standard – between the device sockets
  • Requires the Bridge module
  • Requires the Bridge module
  • Requires a Bridge module and Enelink
  • DTB software and RFID card
  • Width 530mm / Height 250mm / Depth 156mm
  • User Manual
  • Wallbox Installation Manual
  • Quick guide
  • CE certificate